CONE PENETRATION TESTER |
SEIKEN,INC. |
| We have following two type testers.@ | |
Portable type Single Piping Cone Penetration Tester@DO-10 |
|
 |
Feature 1. Rapid handling with Pressure push-in/ Measuring part and Simple extensive rods 2. Direct readout of Penetration resistance with NI unit. 3. It has QC scale for immediate check of Cone bearing capacity, Cohesive capacity and Ground bearing capacity |
| Specification and Constitution | |
| Point Cone | Pointed angle: 30 degree Bottom dimensions: 6.45cm2, 1pc. |
| Extension Rod | Stainless steel made, Line around the rod at intervals of 10cm, Dia.16mm X 50cm, POpcs. |
| Pressed insert-Measuring Part | Serial static loading by human power, Proving ring type (1000N/100 graduated), QC scale combined use with Reflective mirror |
| Accessories | Wrench, Transport case |
| Note@Special accessory (Optional): Point Cone: Pointed angle 30 degree, Bottom dimensions 3.24cm2 | |
Portable type Double Piping Cone Penetration Tester@DO-12 |
|
| It is very uncompaired light and compact body, Portable Double piping Cone! | |
 |
Feature 1. Combination the thin and strong Outer pipes and the screw-less Inner pipes makes the handling easily in same of the single type. 2. Direct readout of Penetration resistance with NI unit 3. It has QC scale for immediate check of Cone bearing capacity, Cohesive capacity and Ground bearing capacity 4. Rich attrition-proof stainless steel cone |
| Specification and Constitution | |
| Point Cone | For Soft soil (30 degree, 6.45cm2) and For Hard soil (30 degree, 3.24cm2)@2 kinds |
| Extension Rod | Outer pipes:17.3mmO.D.~50cm, Stainless stell madeALine around the rod
at intervals of 10cm, POpcs. Inner pipes: Dia.10mmX50cm, Stainless stell made, POpcs. |
| Press-in/Measuring Part | Serial static loading by manual operation type, Light alloy made load frame type, Proving ring type i1000N /100graduated), QC scale combined use with Reflective mirror |
| Accessories | Wrench, Transport case |
